Depot CI

Depot CI is a programmable CI system for engineers and agents. Workflows in Depot CI run entirely on Depot compute with built-in job visibility, debuggability, and control. GitHub Actions is the first syntax Depot CI supports: migrate your existing GitHub Actions workflows, and get fast, reliable runs on optimized infrastructure.

This SKILL.md covers the core workflow plus the most common commands. Detailed flag tables, JSON output shapes, and less-common commands live in three reference files under references/, pointed to from the relevant sections below. Load a reference file only when you need detail it points to.

Architecture

Three subsystems: compute (provisions and executes work), orchestrator (schedules multi-step workflows, handles dependencies), GitHub Actions parser (translates Actions YAML into orchestrator workflows). The system is fully programmable.

Common flags

Nearly every depot ci command (and depot tests) accepts:

--org <id>: organization ID, required when the user belongs to multiple organizations (see Org Context Check below).
--token <token>: Depot API token.
-o, --output json: machine-readable output, useful for agents and scripting. Most depot ci subcommands accept the -o shorthand, but depot tests, depot ci secrets, and depot ci vars accept only the long --output form.

Per-command tables in the reference files omit these to cut noise; assume they're available.

Org Context Check for Multi-Org Users

If a user belongs to multiple organizations, before setup/migration or if CI commands can't find expected workflows, verify Depot org context first:

depot org show              # Current org ID
depot org list              # Orgs the user belongs to
depot org switch <org-id>   # Option A: switch default org for this shell/session

# Option B: keep current org and target explicitly per command
depot ci run --org <org-id> --workflow .depot/workflows/ci.yml

Use --org <org-id> when the workflow/repo lives in a different org than the current default.

Getting Started

1. Install the Depot Code Access GitHub App

Depot dashboard → Settings → GitHub Code Access → Connect to GitHub. (If you've used Claude Code on Depot, this may already be installed.)

2. Migrate workflows

depot ci migrate

This interactive wizard:

Checks that the Depot Code Access app is installed and configured.
Discovers all workflows in .github/workflows/ and analyzes each for Depot CI compatibility.
Copies selected workflows to .depot/workflows/ with inline corrections and comments, and copies local actions from .github/actions/ to .depot/actions/.
Detects secrets and variables referenced in workflows and prints next steps for importing them.

Your .github/ directory is untouched, so workflows run in both GitHub and Depot simultaneously. Warning: workflows that cause side effects (deploys, artifact updates) will execute twice.

3. Import secrets and variables

depot ci migrate secrets-and-vars

This creates and runs a one-shot GitHub Actions workflow on a temporary branch that reads your existing secrets and variables and imports them into Depot CI. You can also add them manually with depot ci secrets add / depot ci vars add (see Managing Secrets and Variables below).

For migration detail (the preflight/workflows/secrets-and-vars subcommands, their flag tables, exactly what gets transformed, and manual setup), read references/migration.md.

Managing Secrets and Variables

Secrets (referenced as ${{ secrets.NAME }}, encrypted, never readable after creation) and variables (referenced as ${{ vars.NAME }}, values readable) share a variant model. A name groups one or more variants; each variant holds a value plus optional selectors (--repo, --env, --branch, --workflow) that match jobs by repository, GitHub environment, branch, and workflow file. A variant with no selectors applies to every job in the organization. The CLI manages all four selector kinds directly, so variants no longer require the dashboard.

Secret values come from an interactive prompt, piped stdin, or KEY=VALUE bulk pairs (no --value flag for secrets). Variable values use --value, a prompt, or KEY=VALUE pairs.

# Secrets: add (prompt or piped stdin), list, remove
depot ci secrets add SECRET_NAME                                   # Prompts securely
printf '%s' "$NPM_TOKEN" | depot ci secrets add SECRET_NAME        # From stdin (scripts)
depot ci secrets add SECRET_NAME --repo owner/repo --branch main   # Scoped variant
depot ci secrets list
depot ci secrets remove SECRET_NAME

# Variables: add, list, remove
depot ci vars add VAR_NAME --value "some-value"
depot ci vars add VAR_NAME --value "prod" --repo owner/repo --env production   # Scoped variant
depot ci vars list
depot ci vars remove VAR_NAME

For the full command surface (the set, bulk, and get secrets subcommands, every flag table, and how Depot resolves which variant wins at run time), read references/secrets-and-variables.md.

Credential safety

Treat credentials as sensitive input and never echo them back in outputs.

For non-interactive flows, pipe secret values via stdin (for example printf '%s' "$NPM_TOKEN" | depot ci secrets set SECRET_NAME --from-stdin), not command-line literals.
Prefer interactive prompts over passing secret values as command arguments. Don't hardcode secrets or tokens in commands, scripts, workflow YAML, logs, or examples.
Use CI secret stores for DEPOT_TOKEN and other credentials; pass at runtime only.
Avoid force/non-interactive destructive flags unless explicitly requested. Before running credential-affecting commands, confirm scope (org, repo, workflow) and intended target.

Running Workflows

# Run a workflow (auto-detects repo from git remotes, applies local uncommitted changes)
depot ci run --workflow .depot/workflows/ci.yml

# Run in a specific org (for multi-org users)
depot ci run --org <org-id> --workflow .depot/workflows/ci.yml

# Run specific jobs only
depot ci run --workflow .depot/workflows/ci.yml --job build --job test

# Trigger a run and stream its logs live
depot ci run --workflow .depot/workflows/ci.yml --job test --follow

# Run a job and connect via SSH
depot ci run --workflow .depot/workflows/ci.yml --job build --ssh

# Debug with a tmate session after step N (requires a single --job)
depot ci run --workflow .depot/workflows/ci.yml --job build --ssh-after-step 3

# Override the auto-detected repository (multiple remotes or no origin)
depot ci run --workflow .depot/workflows/ci.yml --repo owner/repo

The CLI auto-detects the GitHub repository from git remotes (preferring origin); pass --repo owner/repo to override. It also auto-detects uncommitted changes vs. the default branch, uploads a patch to Depot Cache, and injects a step to apply it after checkout, so your local working state runs without needing a push. Use --ssh / --ssh-after-step to start a debug session when launching a new run; use depot ci ssh to connect to an already-running job. Pass --follow (or -f) to stream the triggered run's logs as soon as it starts: it follows the single --job you request, or auto-selects when the run has one job and prompts when several are running. --follow cannot be combined with --ssh / --ssh-after-step.

Dispatching Workflows

depot ci dispatch triggers a workflow via workflow_dispatch from the terminal. Inputs are validated against the workflow's declared input schema (required inputs must be supplied, typed inputs are coerced).

depot ci dispatch --repo depot/cli --workflow deploy.yml --ref main
depot ci dispatch --repo depot/cli --workflow deploy.yml --ref main \
  --input environment=staging --input dry_run=true
depot ci dispatch --repo depot/cli --workflow deploy.yml --ref main --output json

--workflow takes the workflow file's basename (for example deploy.yml), not the full path .depot/workflows/deploy.yml, matching GitHub's workflow_dispatch API convention. Required flags: --repo <owner/repo>, --workflow <filename>, --ref <branch-or-tag>. --input <key>=<value> is repeatable.

Custom Images

Build a custom image once and reuse it across jobs to skip repeated setup steps. A custom image is a snapshot of a Depot CI sandbox, stored in your org's Depot registry, that any job in any workflow can reference by name.

Build the image

Add the snapshot: keyword to a job that runs your setup steps. After the steps complete, Depot captures the sandbox state and pushes it to the Depot registry as a reusable image. Snapshot jobs first check whether the requested tags already exist: if they do, Depot skips the job and reuses the snapshot; if not, Depot runs the job and creates it.

jobs:
  build-image:
    runs-on: depot-ubuntu-latest
    snapshot: ci-base:v1
    steps:
      - run: sudo apt-get update && sudo apt-get install -y your-tool

For advanced configuration, use the expanded snapshot: form. The with: block configures the underlying depot/snapshot-action; for example, max-age forces a rebuild after the configured age:

jobs:
  build-image:
    runs-on: depot-ubuntu-latest
    snapshot:
      image-name: ci-base
      version: v1
      with:
        max-age: 5d
    steps:
      - run: sudo apt-get update && sudo apt-get install -y your-tool

If no version is given, Depot uses the latest tag. An explicit version like v1 tags the snapshot as both v1 and latest, so consumers can pin a version or follow latest.

Use the image

Reference the image in any Depot CI job with the runs-on object syntax, specifying size and image (both required):

jobs:
  test:
    runs-on:
      size: 2x8
      image: ci-base
    steps:
      - uses: actions/checkout@v4

The image value can be a shorthand name like ci-base (which Depot expands to {orgId}.registry.depot.dev/depot/snapshots/ci-base) or a full Depot Registry reference {orgId}.registry.depot.dev/some-image. It must reference an image created by a snapshot job, not an arbitrary image.

Available sizes: 2x8, 4x16, 8x32, 16x64, 32x128, 64x256 (CPUs x RAM in GB).

Constraints: images get pushed to and must be pulled from the Depot registry (registry.depot.dev), external registries are not supported.

Parallel Steps

Depot CI supports running steps concurrently within a single job using parallel: blocks, reducing job duration to the slowest branch rather than the sum of all steps. This is a Depot CI-specific feature, not compatible with GitHub Actions runners.

Use parallel: inside steps: with individual steps or sequential: groups. Each branch starts from the same job state; step outputs, environment variable, and $GITHUB_PATH changes from all branches are merged back when the block completes.

# Run lint, typecheck, and tests concurrently
steps:
  - uses: actions/checkout@v4
  - name: Install dependencies
    run: pnpm install
  - parallel:
      - name: Lint
        run: pnpm lint
      - name: Typecheck
        run: pnpm type-check
      - name: Test
        run: pnpm test

Use sequential: inside parallel: to group steps that must run in order within one branch:

- parallel:
    - sequential:
        - name: Build
          run: npm run build
        - name: Test
          run: npm test
    - name: Lint
      run: npm run lint

Control failure behavior with fail-fast:. It defaults to true (cancels remaining steps in the block); false lets all steps run to completion:

- fail-fast: false
  parallel:
    - name: Lint
      run: pnpm lint
    - name: Typecheck
      run: pnpm type-check

Set continue-on-error: true on an individual step inside a parallel: block to absorb that step's failure so the group can still succeed. This differs from fail-fast:, which only controls whether the remaining steps are cancelled when a failure occurs, not whether the group fails:

- parallel:
    - name: Optional check
      continue-on-error: true
      run: pnpm optional-check
    - name: Required check
      run: pnpm required-check

Limitations:

parallel: cannot be nested inside another parallel: (use sequential: inside parallel: instead).
Step id values must be unique across the entire job (including across different parallel blocks).

Retry Steps

Automatically re-run a failed run: step to recover from flaky commands (network blips, transient registry errors) by adding a retry: key. Depot re-runs the step in place after a backoff delay and lets the job continue if a later attempt succeeds. Retries fire on any non-zero exit (no exit-code filtering) and are supported on run: steps only; retry: on a uses: action step is rejected at parse time, because actions carry post: and state machinery that is unsafe to re-run.

Shorthand form sets the number of additional attempts:

steps:
  - run: npm ci
    retry: 3   # up to 4 total runs

Structured form controls backoff and delays:

steps:
  - run: ./flaky-integration-test.sh
    retry:
      retries: 3            # additional attempts after the first run (1-10)
      backoff: exponential  # 'constant' (default) or 'exponential'
      delay-seconds: 5      # base delay before the first retry (default 5)
      max-delay-seconds: 60 # cap on a single delay (default 60)

retries: N means up to N + 1 total runs. constant waits delay-seconds before every retry; exponential doubles the wait each attempt (attempt n waits delay-seconds × 2^(n-1)) up to max-delay-seconds. timeout-minutes applies per attempt (each gets a fresh budget), and continue-on-error is applied only after all retries are exhausted. State is not reset between attempts, since retries reuse the same sandbox, so prepend your own cleanup if a step needs a clean slate.

Sandbox Capabilities

Nested virtualization: every Depot CI sandbox exposes /dev/kvm with hardware virtualization enabled by default, so KVM/QEMU, Android emulator, and VM-based end-to-end tests run without extra configuration.
DEPOT_JOB_URL: each job's environment includes DEPOT_JOB_URL, a direct link to the job in the Depot dashboard.
GitHub checks: Depot CI automatically reports a GitHub check for each job in a workflow run.

OIDC for Cloud Authentication

Depot CI issues a signed JWT to each job so workflows can authenticate to cloud providers (AWS, GCP, Azure) with short-lived tokens instead of static credentials. Set permissions: id-token: write in the workflow for the token to be issued; the issuer is https://identity.depot.dev. Depot injects the token-request credentials into the environment, so standard actions like aws-actions/configure-aws-credentials work without extra configuration.

For provider trust-policy setup, the sub spiffe claim format and wildcards, the full token claim reference, and migrating an existing GitHub Actions OIDC trust policy, read references/oidc.md.

Running, Monitoring, and Debugging Runs

Common triage and inspection commands:

# Find recent/failed runs (defaults to queued + running)
depot ci run list
depot ci run list --status failed -n 10
depot ci run list --repo depot/api --status failed --pr 42

# Inspect a run's full workflow -> job -> attempt hierarchy
depot ci status <run-id>

# Pull logs (accepts run, job, or attempt ID; auto-selects the job if only one)
depot ci logs <run-id>
depot ci logs <run-id> --job build
depot ci logs <job-id> --follow

# Group and explain a run's failures, with a suggested fix per group
depot ci diagnose --run <run-id>

# Inspect parsed test results (Depot CI or GitHub Actions)
depot tests <attempt-id> --ci --status failed

Full command index, all in references/runs-and-debugging.md:

| Command | Purpose | | ------- | ------- | | depot ci run list | List runs (triage entrypoint); filter by status, repo, sha, trigger, PR | | depot ci run show | Flat record for one run | | depot ci workflow list | List workflow executions with per-job counts; filter by --name | | depot ci workflow show | One workflow's executions, jobs, and attempts | | depot ci status | Full run → workflow → job → attempt hierarchy | | depot ci logs | Fetch or --follow job logs; JSON/JSONL export | | depot ci summary | GitHub Actions step summary markdown for an attempt | | depot ci metrics | CPU and memory utilization for an attempt, job, or run | | depot ci artifacts | list run artifacts and download one by ID | | depot ci diagnose | Diagnose a failed run/workflow/job/attempt with grouped failures and fixes | | depot tests | List parsed test results; --ci or --gha, with status/suite/test filters | | depot ci ssh | Interactive terminal into a running job's sandbox | | depot ci cancel | Cancel a whole run, a workflow, or a single job | | depot ci rerun | Re-run every terminal-state job in a workflow | | depot ci retry | Retry a single failed/cancelled job, or all of them with --failed |

Read references/runs-and-debugging.md when you need a complete flag table, JSON output shape, or any command not shown in the triage examples above.

Compatibility with GitHub Actions

Depot CI executes GitHub Actions YAML workflows. There are a few limitations where compatibility isn't 1:1. The full support and compatibility list is in references/github-actions-compatibility.md.

Read the compatibility reference when you need to answer or act on any of the following or similar questions:

Whether a specific workflow-, job-, or step-level field is supported, for example concurrency, jobs.<id>.environment, jobs.<id>.snapshot, jobs.<id>.container, jobs.<id>.services, jobs.<id>.strategy.matrix, steps[*].shell.
Whether a trigger event is accepted: the supported list (push, pull_request, pull_request_target, pull_request_review, deployment_status, repository_dispatch, schedule, workflow_call, workflow_dispatch, workflow_run, merge_group) and the GitHub-only events Depot CI rejects (for example, release, issues, deployment, branch_protection_rule).
Which expression contexts (github, env, vars, secrets, needs, strategy, matrix, steps, job, runner, inputs) and functions (always(), success(), failure(), cancelled(), case(), contains(), startsWith(), endsWith(), format(), join(), toJSON(), fromJSON(), hashFiles()) are available.
Which permissions scopes work (actions, checks, contents, id-token, metadata, pull_requests, statuses, workflows).
Which action types run (JavaScript Node 12/16/20/24, Composite, Docker).
Which runs-on Depot runner labels and sandbox sizes Depot CI supports (x86_64 only, no Arm, macOS, or Windows), and how unrecognized labels are treated.
Diagnosing why depot ci migrate auto-disabled a job, stripped a trigger from on:, or remapped a runs-on label.
Recommending workarounds for known unsupported features (cross-repo reusable workflows, fork-triggered PRs, deployment environments).

For routine migrate, run, secrets, or debug tasks that don't depend on a specific GHA feature, you don't need to load references/github-actions-compatibility.md.

Directory Structure

your-repo/
├── .github/
│   ├── workflows/     # Original GHA workflows (keep running)
│   └── actions/       # Local composite actions
├── .depot/
│   ├── workflows/     # Depot CI copies of workflows
│   └── actions/       # Depot CI copies of local actions

Common Mistakes

| Mistake | Fix | | --------------------------------------------- | ---------------------------------------------------------------------------------------- | | Removing .github/workflows/ after migration | Keep them during transition to verify Depot CI parity | | Using cross-repo reusable workflows | Not supported yet, inline the workflow or copy it locally | | Expecting branch/env variants need the dashboard | The CLI manages variants directly via --repo/--env/--branch/--workflow selectors | | Running in the wrong org context | Check depot org show, list with depot org list, then switch org or pass --org <id> | | Forgetting --org flag with multiple orgs | Migration or run commands may miss the expected repo/workflow; specify --org <id> | | Workflows with runs-on: windows-latest | Treated as depot-ubuntu-latest, may fail |